Are you interested in getting off the beaten path? The Inspire offers a style that will surely withstand variable trends with these pure lines of balanced proportions, allowing the brand  Osburn to easily compare to European-style products. This more contemporary look is available on steel base, soapstone or even a minimalist base for those who prefer to place the unit directly on a non-combustible podium. Equipped with a 2.3 cubic feet firebox and an outside air intake, this unit will meet the requirements of domestic energy standards, not to mention that a mobile home installation is permitted.

 The Inspire meets EPA requirements with emissions as 2.3 g/h and complies with the most stringent North American requirements. A guarantee of quality, reliability and durability, once again Osburn clearly demonstrates its firm commitment to the environment to the delight of wood heating fans.

Appliance Performance 

• Fuel type: Dry cordwood
• Recommended heating area-ft²: 500 - 2,100
• Overall firebox volume: 2.4
• EPA loading volume-ft³: 2.02
• Maximum burn time: 8 h
• Maximum heat output (dry cordwood): 75,000 BTU/h (22.0 kW)
• Overall heat output rate <: 14,800 BTU/h (4.34 kW) to 28,600 BTU/h (8.38 kW)
• Average overall efficiency (EPA cribs/Douglas fir): N.A. (HHV) N.A. (LHV)
• Average overall efficiency (dry cordwood): 69% (HHV) 74 % (LHV)
• Optimum efficiency: 77 %
• Average particulate emissions rate: 1.54 g/h
• Average CO: 89.4 g/h

⁽¹⁾ Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time and maximum heat output.

⁽⁾ Recommended heating area and maximum burn time may vary subject to location in home, chimney draft, heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.

⁽²⁾ The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb./ft³ and 20 lb./ft³. Other performances are based on a fuel load prescribed by the standard. The specified loading density varies between 7 lb./ft³ and 12 lb./ft³. The moisture content is between 19% and 25%.

⁽³⁾ As measured per CSA B415.1-10 stack loss method.

⁽⁴⁾ Higher Heating Value of the fuel.

⁽⁵⁾ Lower Heating Value of the fuel.

⁽⁶⁾ Performances based on a fuel load prescribed by the standard at 7 lb./ft³ and with a moisture content between 19% and 25%.

⁽⁷⁾ Optimum overall efficiency at a specific burn rate (LHV).

⁽⁸⁾ This appliance is officially tested and certified by an independent agency.

⁽⁹⁾ Carbon monoxide

General Features

• Combustion technology: Non-catalytic
• High-efficiency certified appliance: Yes, EPA 2020 approved
• Maximum log length: 20"
• Log positioning: Over width
• Chimney diameter: 6"
• Flue outlet diameter: 6"
• Type of chimney: CAN/ULC S629, UL 103 HT (2100 °F)
• Minimum chimney height (feet): 12'
• Baffle type: C-Cast
• Approved for an alcove installation: Yes
• Approved for a mobile home installation: Yes, with fresh air intake
• Shipping Weight: 537 lb. (244 kg)
• Door type: Single, glass with steel frame
• Glass type: Ceramic glass
• Glass surface – dimensions (Width X Height): 20 1/4" X 9 1/2"
• Glass air-wash system: Yes
• Overall dimension (Height): 36 9/16"
• Overall dimension (Width): 27 7/8"
• Overall dimension (Depth): 24 15/16"
• Door opening – dimension (Height): 8 3/8"
• Door opening - dimension (Width): 20"
• Firebox – dimension (Height): 11 15/16"
• Firebox – dimension (Width): 21 1/4"
• Firebox – dimension (Depth): 17 11/16"
• Firebox lined with refractory bricks for better heat distribution: Yes
• Stainless-steel secondary-air system improving gas combustion: Yes
• Model: Pedestal
• Steel thickness – body: 3/16"
• Steel thickness – top: 5/16"
• Easy-to-access ash drawer: Yes
• USA standard (emissions): EPA Method 28
• Canadian Standard (emissions): CSA B415.1-10
• USA standard (safety): UL 1482, UL 737
• Canadian standard (safety): ULC S627
• Tested and listed as per applicable standards: By an accredited laboratory (CAN/USA)
• Warranty: Limited lifetime

Specifications

• BTU: 75,000 BTU
• Heating Capacity: 500-2,100 sq. ft.
• Firebox Size: 2.4 cu ft.
• Log Length: up to 20”
• Flue Pipe Diameter: 6”
• Weight: 400 lbs.
• Width: 27 7/8”
• Depth - Overall: 24 15/16”
• Height: 36 9/16”
• Mobile Home Approved: Yes

Configuration

*NOTE: Shown with required decorative side panel and base kit (not included). The decorative side panel and base kit must be purchased to complete this unit.

Options

5'' Fresh Air Intake Register with Airtight Damper

--- allows outside combustion air to feed the appliance

Blower Assembly with Variable Speed Control (up to 130 cfm)

--- designed to help distribute the heated air produced by those stoves, making the heating process easier, faster, and more efficient

Moulded Refractory Panel

--- adds extra appeal to the stove's interior

Moulded Refractory Panel for Minimalist Base and Insert

--- adds extra appeal to the stove's interior

Quick Connect Thermodisc Kit

--- turn blower automatically on/off.

Manuals

Installation and Operation Manual

Wood Stove Dimension